Brake Caliper, Brake 1LA/1LJ/1ZB/1ZT, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to OVERVIEW - FRONT BRAKES, 1LA, 1LJ, 1ZB AND 1ZT .

NOTE:

Use new bolts, allocate correct bolts.

-- Carefully press the brake caliper with the brake carrier and the installed brake pads over the brake rotor.

-- Tighten the brake carrier with new bolts -1-.

Fig 1: Removing/Installing Electrical Connector -2-, Arrows -A- And -B-

Courtesy of AUDI OF AMERICA, LLC

-- Insert the brake hose in the bracket -4-.

-- Insert the electric wire in the bracket -2- and lock it to the right -B-.

-- Mount the wheels, refer to WHEEL, CHANGING AND MOUNTING .

WARNING:

There is the risk of an accident.

Before moving the vehicle, press the brake pedal firmly several times to seat the brake pads correctly in their operating position.
Make sure the brakes are working correctly before driving the vehicle.