Reducing Agent Delivery Line, Removing And Installing
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Line Release Tool T40278
Procedure
WARNING:
Danger due to reducing agent leaking out.
- Read safety precautions for handling reducing agent, refer to SCR SYSTEM SAFETY PRECAUTIONS .
-- Slide the Line Release Tool T40278, as shown in illustration A over the connector -arrow-.
-- Pull the retaining strap -1- on the Line Release Tool T40278, as shown in illustration B in the direction of the -arrow-.
-- Remove the Line Release Tool T40278, as shown in the illustration with a small screw driver.