Exhaust Gas Temperature Sensor 3 -G495-, REMOVING AND INSTALLING, VEHICLE WITH ENGINE CODE CGQB: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specification, refer to OVERVIEW - EXHAUST TEMPERATURE REGULATION, VEHICLES WITH ENGINE CODE CGQB .

NOTE:

Protect the exhaust gas temperature sensor against knocks and impacts. A dropped exhaust gas temperature sensor may not be used again.

Coat the thread with hot bolt paste.

-- Install the front exhaust pipe, refer to FRONT EXHAUST PIPE, REMOVING AND INSTALLING, VEHICLES WITH ENGINE CODE CGQB .