LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 657 (3.0L - Exhaust System & Emission Controls - Engine Code(S): CPNB) >> 26 Exhaust System, Emission Controls >> Exhaust Temperature Regulation >> Exhaust Gas Temperature Sensor, Removing And Installing >> Exhaust Gas Temperature Sensor 2 -G448-, REMOVING AND INSTALLING >> Installing

Exhaust Gas Temperature Sensor 2 -G448-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specification

NOTE:

Protect the exhaust gas temperature sensor against knocks and impacts. A dropped exhaust gas temperature sensor may not be used again.

Coat the thread with hot bolt paste .

scientia non olet · About LEMON Manuals