LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 657 (3.0L - Exhaust System & Emission Controls - Engine Code(S): CPNB) >> 26 Exhaust System, Emission Controls >> Exhaust Manifold >> Exhaust Manifold, Removing And Installing >> Right Exhaust Manifold, Removing And Installing >> Removing

Right Exhaust Manifold, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

When working on the whole exhaust system:

-- Remove the particulate filter, refer to PARTICULATE FILTER, REMOVING AND INSTALLING .

-- Remove the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the front noise insulation -1-, refer to OVERVIEW - NOISE INSULATION .

Fig 1: Identifying Noise Insulation
GWWA10-11100Courtesy of AUDI OF AMERICA, LLC

-- Remove the air guide hose from the air guide pipe by loosening the hose clamp -arrow-.

Fig 2: Removing Air Guide Hose From Right Air Guide Pipe And Lay It Aside By Loosening Hose Clamp
GWWA21-10230Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 3-.

Fig 3: Removing Screws
GWWA21-10231Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamp -1- and remove the air guide hose.

-- Move the guide pipe to the side.

-- Remove the bolts -2-.

Fig 4: Locating Flange Bolts
GWWA21-10538Courtesy of AUDI OF AMERICA, LLC
NOTE:

Ignore -1-.

-- Loosen and remove the nuts in the following sequence: -8 through 1-. Remove the exhaust manifold.

Fig 5: Exhaust Manifold - Tightening Sequence
GWWA26-11005Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals