Tightening Specifications

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Refer to OVERVIEW - EXHAUST MANIFOLD .
Refer to Figure.
Refer to Figure.

NOTE:

Replace the seals and self-locking nuts.

-- Tighten the exhaust manifold nuts, refer to Figure.

-- Install the A/C compressor, refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

-- Install the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Install the front noise insulation, refer to OVERVIEW - NOISE INSULATION .

-- Connect the coolant line with the connector coupling, refer to Fig 1.

Fig 1: Connecting Coolant Hose Coupling

Courtesy of AUDI OF AMERICA, LLC

-- Install the Throttle Valve Control Module -J338-, refer to Throttle Valve Control Module -J338-, REMOVING AND INSTALLING .

-- Install the particulate filter, refer to PARTICULATE FILTER, REMOVING AND INSTALLING .

Fig 2: Air Hose Clamp Identification

Courtesy of AUDI OF AMERICA, LLC