EGR Motor -V338-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the intake manifold, refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

Fig 1: Identifying Connector

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Pay attention to the installed position of the EGR motor --.

-- Remove the bolts -arrows-.

Fig 2: Locating Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Free up coolant line and fuel line.

-- Press the coolant line and the fuel line back and then remove the EGR Motor -V338- from the EGR cooler.