EGR Cooler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Connectors And Check Valve

Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant, refer to COOLANT, DRAINING AND FILLING .

-- Remove the connector -1- from the bracket and disconnect it.

-- Remove the connector -2- and check valve -3- from the bracket.

-- Remove the intake manifold, refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

Fig 2: Identifying Connector

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamp -2- and press it towards the rear.

-- Loosen the clamp -4- and remove the coolant hose.

-- Remove the bolts -arrows- and remove the EGR cooler upward from the supports.

NOTE:

Ignore item -3-.