SCR Catalytic Converter, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bolts -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -2-.

NOTE:

Ignore item -1-.

-- Loosen the threaded connections -arrows-, slide the clamping sleeve to the rear and remove the SRC Catalytic Converter.

Fig 2: Clamping Sleeve Threaded Connections

Courtesy of AUDI OF AMERICA, LLC