Overview - Secondary Air Injection System
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Hose
- For secondary air
- O-Ring
- Replacing
- Pipe
- For secondary air
- Bolt
- Tightening Specification: 20 Nm
- Bolt
- Tightening Specification: 9 Nm
- Heat Shield
- Bolt
- Tightening Specification: 9 Nm
- O-Ring
- Replacing
- Secondary Air Injection Pump Motor -V101-
- Removing and installing, refer to Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING .
- O-Ring
- Replacing
- Hose
- For secondary air
- With resonator
- Bracket
- For Secondary Air Injection Pump Motor -V101-
- Nut
- Tightening Specification: 9 Nm
- Nut
- Tightening Specification: 8 Nm
- Bonded Rubber Bushing
- Hose
- For secondary air
- Secondary Air Injection Sensor 1 -G609-
- Removing and installing, refer to Secondary Air Injection Sensor 1 -G609-, REMOVING AND INSTALLING .
- O-Ring
- Replacing
- Bolt
- Tightening Specification: 4 Nm
- Connection
- Bolt
- Tightening Specification: 9 Nm
- Bolt
- Tightening Specification: 9 Nm
- Secondary Air Injection Solenoid Valve -N112-
- Removing and installing, refer to Secondary Air Injection Solenoid Valve -N112-, REMOVING AND INSTALLING .
- Seal
- Replacing
- Bolt
- Tightening Specification: 9 Nm