LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 656 (2.0L - Exhaust System & Emission Controls - Engine Code(S): CAEB, CHJA, CPMA & CPMB) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Front Muffler, Removing And Installing >> Front Muffler, Removing And Installing, Non-Hybrid Vehicles >> Installing

Front Muffler, Removing And Installing, Non-Hybrid Vehicles: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace seals and self-locking nuts.

-- Install the exhaust system free of tension, refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .

-- Install the rear noise insulation, refer to OVERVIEW - NOISE INSULATION .

Tightening specifications