LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 656 (2.0L - Exhaust System & Emission Controls - Engine Code(S): CAEB, CHJA, CPMA & CPMB) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Exhaust System, Installing Without Tension >> Tail Pipes, Aligning

Tail Pipes, Aligning

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles with Standard Tailpipes

Fig 1: Checking Distance Of End Pipes At Left/Right To Bumper
GWWA26-0471Courtesy of AUDI OF AMERICA, LLC

-- Tighten the clamping sleeve threaded connections evenly.

Vehicles with Double Tail Pipes

Fig 2: Checking Distance Between Tailpipe And Bumper
GWWA26-10675Courtesy of AUDI OF AMERICA, LLC

-- Tighten the clamping sleeve threaded connections evenly.

Hybrid Vehicles

Fig 3: Tail Pipe Centering To Bumper
GWWA26-11343Courtesy of AUDI OF AMERICA, LLC

-- Check distance of left and right tail pipes to bumper:

Tightening specifications 

scientia non olet · About LEMON Manuals