Exhaust Door Control Unit -J883-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Replace the nuts.
-- Bring the Exhaust Door Control Unit -J883- into the installation position.
- The spring -2- must engage the groves -arrows- of the exhaust flap -1-.
-- Install the bumper cover, refer to OVERVIEW - BUMPER COVER .
Tightening specifications
- Refer to Figure