Fuel Level Sensor -G-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Level Sensor G Pulled Slightly To Side And Simultaneously Upward

Courtesy of AUDI OF AMERICA, LLC

-- Follow all safety precautions, refer to SAFETY PRECAUTIONS .

-- Follow the rules for clean working conditions, refer to CLEAN WORKING CONDITIONS .

-- Remove the fuel delivery unit, refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .

-- Pull the Fuel Level Sensor - G- first slightly toward the inside and then upward and remove it -arrows-.

-- Release the retaining tabs -arrows- with a screwdriver, if necessary.

Fig 2: Fuel Level Sensor Electrical Wires

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of damage.

Before disconnecting connectors to the Fuel Level Sensor -G-, first release connector contact retaining tab.

-- Unlock and disconnect the connectors -1 through 3-.

Fig 3: Fuel Level Sensor Electrical Connectors

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector from the sealing flange.