LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (Fuel Supply System - Engine Code(S): CAEB, CALB, CHJA, CPMA, CPMB, CTUC & CTUD) >> 20 Fuel Supply System >> Fuel Delivery Unit/Fuel Level Sensor >> Fuel Level Sensor -G-, REMOVING AND INSTALLING >> Installing

Fuel Level Sensor -G-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Connect the electrical connections -1 through 3- and make sure they are securely engaged.

-- Insert the Fuel Level Sensor -G- in the guides on the fuel delivery unit and push down until it engages.

-- Install the fuel delivery unit, refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING  while following the information on connecting the battery.

scientia non olet · About LEMON Manuals