LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (Fuel Supply System - Engine Code(S): CAEB, CALB, CHJA, CPMA, CPMB, CTUC & CTUD) >> 20 Fuel Supply System >> EVAP System >> Leak Detection Pump, Removing And Installing >> Removing

Leak Detection Pump, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Leak Detection Pump (LDP) -V144-
GWWA20-10691Courtesy of AUDI OF AMERICA, LLC

-- Remove the Evaporative Emission (EVAP) canister, refer to EVAP CANISTER, REMOVING AND INSTALLING, VEHICLES FROM MY 2013 .

-- Unclip the vacuum line bracket -3-.

-- Remove the bolts -1-.

-- Remove the Leak Detection Pump -V144- -2- from the EVAP canister.

scientia non olet · About LEMON Manuals