LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (Fuel Supply System - Engine Code(S): CAEB, CALB, CHJA, CPMA, CPMB, CTUC & CTUD) >> 20 Fuel Supply System >> EVAP System >> Fuel Tank Pressure Sensor, Removing And Installing >> Fuel Tank Pressure Sensor -G400-, REMOVING AND INSTALLING >> Installing

Fuel Tank Pressure Sensor -G400-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal.

-- Install the EVAP canister, refer to EVAP CANISTER, REMOVING AND INSTALLING, VEHICLES FROM MY 2013 .

scientia non olet · About LEMON Manuals