Fuel Tank Leak Detection Control Module, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Follow all safety precautions, refer to SAFETY PRECAUTIONS .

-- Follow the rules for clean working conditions, refer to CLEAN WORKING CONDITIONS .

-- Remove the right center underbody panel, refer to OVERVIEW - UNDERBODY PANELS .

Fig 1: Identifying Bracket, Bolts And Nuts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 3-, nuts -4- and bracket -2-.

-- Release the connector safety catch and disconnect the connector -3-.

Fig 2: Removing Fuel Tank Leak Detection Control Module - J909- -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -2-.

-- Remove the Fuel Tank Leak Detection Control Module - J909- -1- from the bracket.