EVAP Canister, Removing And Installing, Vehicles Through My 2012: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Follow all safety precautions, refer to SAFETY PRECAUTIONS .

-- Follow the rules for clean working conditions, refer to CLEAN WORKING CONDITIONS .

-- Remove the left rear underbody panel, refer to OVERVIEW - UNDERBODY PANELS .

-- Disconnect the connector -7-.

Fig 1: Identifying EVAP Hose Connections & Connector

Courtesy of AUDI OF AMERICA, LLC

-- Press the release button and remove the ventilation lines:

1 -

Ventilation hose to fuel tank

6 -

Vacuum line to the engine

9 -

Vent Line to EVAP Canister Purge Regulator Valve 1 -N80-

-- Remove the hose clamps and disconnect the vent line -4- to the Leak Detection Pump -V144- air filter.

-- Remove the bolts -2, 5 and 8- and remove the EVAP canister -3-.