EVAP Canister, Removing And Installing, Vehicles From My 2013: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Follow all safety precautions, refer to SAFETY PRECAUTIONS .

-- Follow the rules for clean working conditions, refer to CLEAN WORKING CONDITIONS .

-- Remove the left rear underbody panel, refer to OVERVIEW - UNDERBODY PANELS .

-- Press the release button and remove the vent line -arrow-.

Fig 1: Removing/Installing Vent Line

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

Fig 2: Removing/Installing EVAP Canister (Vehicles From MY 2013)

Courtesy of AUDI OF AMERICA, LLC

-- Press the release button to remove vent lines:

4 - Vent Line to EVAP Canister Purge Regulator Valve 1 -N80-

6 - Ventilation hose to fuel tank

-- Remove the bolts -1, 3 and 5- and the EVAP canister -7-.