LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 653 (2.0L - Engine Cooling System - Engine Code(S): CAEB, CHJA, CPMA & CPMB) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Valve, Removing And Installing >> Transmission Coolant Valve -N488-, REMOVING AND INSTALLING >> Installing

Transmission Coolant Valve -N488-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Install the rear noise insulation, refer to OVERVIEW - NOISE INSULATION .

Tightening specifications 

scientia non olet · About LEMON Manuals