Small Coolant Pipe, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Air Intake Hose Components

GWWA21-10302

Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant, refer to COOLANT, DRAINING AND FILLING .

-- Loosen the hose clamps -arrows- and remove the air guide hose.

Non-Hybrid Vehicles with All Engine Codes Except CDZA

Fig 2: Electrical Connectors And Bolts

GWWA19-10451

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the electrical connectors -1 through 3- from the bracket.

Hybrid Vehicles or with Engine Code CDZA

Fig 3: Identifying Bolts And Connectors

GWWA19-11508

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the electrical connectors -1 through 3- from the bracket.

Continuation for All Vehicles

Fig 4: Small Coolant Pipe

GWWA19-10771

Courtesy of AUDI OF AMERICA, LLC

-- Loosen hose clamp -1- and lift the clamp -2- to remove the coolant hoses.

-- Remove the bolts -arrows- and remove the small coolant pipe.