Coolant Pipe For Electric Drive Power And Control Electronics, Removing And Installing, Hybrid Vehicles: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front noise insulation, refer to OVERVIEW - NOISE INSULATION .

-- Remove the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Place the Shop Crane - Drip Tray VAS6208 under separating points.

Fig 1: Coolant Pipe And Hoses

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -1 and 3-, then clamp off the coolant hoses with the Hose Clamps - Up To 25mm 3094 and remove the hoses.

-- Remove the nuts -2- and bolt -4- and then remove the coolant pipe.