LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 651 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Wiper System >> Windshield Wiper Motor -V-, REMOVING AND INSTALLING >> Installing

Windshield Wiper Motor -V-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Windshield Wiper System Tightening Sequence
GWWA92-10143Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Insert the wiper motor -A- with the wiper frame into the vehicle.

-- Tighten bolts, refer to Figure.

-- Position the water drain channel -B- on the wiper motor.

-- Adjust wiper arms, refer to WINDSHIELD WIPER ARMS, ADJUSTING .