Overview - SUBFRAME Mount
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 20 Nm
- Retaining Plate
- For the engine mount
- If the engine mount is faulty, replace the retaining plate
- Check the retaining plate on the opposite side; replace if necessary
- Bolt
- 40 Nm
- Engine Support
- Bolt
- 10 Nm
- Heat Shield
- Bolt
- 90 Nm + an additional 90° turn
- Replace
- Engine Mount
- With the electro-hydraulic engine mount solenoid valve
- Left Electrohydraulic Engine Mount Solenoid Valve -N144-
- Right Electrohydraulic Engine Mount Solenoid Valve -N145-.
- Left and right Installing, refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING .
- Replace in pairs
- Subframe
- Bolt
- 55 Nm