LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 649 (2.0L - Engine Assembly - Engine Code(S): CAEB, CHJA, CPMA & CPMB) >> 10 Engine Assembly >> SUBFRAME Mount >> Overview - SUBFRAME Mount >> Overview - SUBFRAME, Engine Mount

Overview - SUBFRAME, Engine Mount

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Subframe Mount
GWWA10-11044Courtesy of AUDI OF AMERICA, LLC
  1. Not installed
  2. Bolt
    • 20 Nm
  3. Retaining Plate
    • For the engine mount
    • If the engine mount is faulty, replace the retaining plate
    • Check the retaining plate on the opposite side; replace if necessary
  4. Bracket
    • For the hydraulic line
  5. Nut
    • 9 Nm
  6. Bolt
    • 40 Nm
  7. Engine Support
  8. Bolt
    • 10 Nm
  9. Heat Shield
  10. Bolt
    • 90 Nm +90° turn
    • Replacing
  11. Engine Mount
    • With the Left Electrohydraulic Engine Mount Solenoid Valve -N144-
    • Depending on version along with Right Electrohydraulic Engine Mount Solenoid Valve -N145-
    • Removing and installing, refer to ENGINE MOUNT, REMOVING AND INSTALLING .
    • Replace in pairs only
  12. Subframe
  13. Bolt
    • 55 Nm
scientia non olet · About LEMON Manuals