Engine, Supporting In Installed Position

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine Support Bridge 10-222A

Supporting

Fig 1: Installing 10 - 222 A With 10 - 222 A /3 On Left And Right Strut Towers

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Install the Engine Support Bridge 10-222A with Engine Support Bridge - Engine Support 310-222A/3 on the left and right suspension strut towers, as shown in the illustration.

-- Attach the Engine Support Bridge - Spindles 10-222A/11 to the engine lifting eye.

-- Lightly pretension engine with spindles.