Passenger Occupant Detection System Deactivation After A Collision, Market-Specific

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Each time an airbag or passenger belt tensioner deploys, a basic setting must be performed on the seat occupied recognition control module. Refer to Vehicle Diagnostic Tester.
If the seat rails and/or seat pan is replaced after an accident due to deformations resulting from a crash, the passive occupant detection system must be replaced using the "passive occupant detection system service kit". Perform a "basic setting" on the passenger occupant detection system control module. Refer to Vehicle Diagnostic Tester.