Bumper Cover, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specification. Refer to OVERVIEW - BUMPER COVER .
-- When installing, the side catches on the guide piece -2- must engage completely into the bumper cover -1-
-- If the vehicle has lane change assistance, the lane change assistance control module -J769- / -J770- must be recalibrated. Refer to OVERVIEW - LANE CHANGE ASSISTANCE .