Spoiler, Removing And Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Spoiler
-- Remove the bolts -3-, if equipped.
-- Disengage the bottom of the spoiler from the guide pins on the guide.
-- To remove, release the catches -arrows- one by one and remove them from the bumper cover.
-- Disconnect the connectors from the rear parking aid sensors.
-- The clips -arrows- must clip into the bumper cover completely when installed.
- Bumper Cover
- Removed
- Bolt
- 1.5 Nm