Bumper Cover, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Bumper Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Remove the bolt -2-.

-- Disconnect the connector -1-.

-- Remove the bolts -1- and push the wheel housing liner to the side.

Fig 2: Identifying Screws On Wheel Housing Liner

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector from the fog lamp.

-- Remove the bolts -4 and 5-.

Fig 3: Removing Bumper Cover

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the side bolster -3- on the front side panel -arrow- and have a 2nd technician help to pull the bumper cover forward.

-- Remove the bumper cover.