Bumper Cover, Adjusting

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bumper Cover Adjusting Screw

Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- If the gap dimension is not even, loosen the adjusting screw -2-, adjust the cover and radiator grille -1- and then tighten the screw.

-- Check the gap dimension again and repeat the adjustment if necessary.