Front Spoiler
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the bolts -1- and the end plate.
-- Remove the bolts -1 and 3-, if equipped.
-- Open the retainers -arrows- and remove the connecting piece -2-.
-- Open the retainers -arrows- on the spoiler at the bumper -4- and at the bottom of the radiator grille in stages and then remove the spoiler.
Installing
- Tightening specification. Refer to OVERVIEW - BUMPER COVER .
Install in reverse order of removal. Note the following:
-- Install the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .