Special Tools
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Puller - Unit Injector T10055 with Puller - Unit Injector - Adapter 1 T10055/1 and Puller - Unit Injector - Adapter 3 T10055/3
- O-Ring Assembly Sleeve T10377
- Diesel Engine Tool Set - 17mm T10395A
- Union Nut Socket T40055
- Socket - 27mm T40218
- Locking Pin T40245
- High Pressure Pump Shaft Holder T40248 or High Pressure Pump Shaft Holder T40292 (depending on the version, different adapters are installed)
- Crankshaft Turning Tool T40257
- Wrench - 21mm T40263
- High Pressure Pump Shaft Holder T40292
- Torque Wrench 1331 5-50Nm VAG1331
- Torque Wrench 1331 Insert - Reversible Ratchet VAG1331/1
- Torque Wrench 1331 Insert - Open Jaw - 17mm VAG1331/6
- Wiring Harness Repair Set - Hot Air Blower VAS1978/14A -1- with nozzle attachment -2- from the Wiring Harness Repair Set VAS1978B.
- Small commercially available locking pliers -3-
- Hand Vacuum Pump VAS6213
- Fuel Return System Tester VAS6330
- Hose Clip Pliers VAS6362
- Label for module 1, Cod. A+B VAS6606/1-1
- Test Adapter - Isolator Box 1 - Breakout Box with Detachable Terminals (198 pins) VAS6606/1-2
- Test Adapter - Isolator Box 1 - Breakout Box with Detachable Terminals (198 pins) VAS6606/1-3
- Label for module 1, Cod. A+B VAS6606/1-1
- Template VAS6606/2-1
- Template VAS6606/3-1
- Test Adapter for ECU (1.0m) VAS6606/7-1 and Test Adapter for ECU (1.7m) VAS6606/7-2.
- Return Flow Meter VAS6684
- Hose Clamps - Up To 25mm 3094
- Pry Lever 80-200
- Adapter T40314
- Cleaning Set VAS6811