Particulate Sensor -G784-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the center underbody cover. Refer to OVERVIEW - UNDERBODY PANELS .

-- Disconnect the connector -1-.

Fig 1: Particulate Sensor -G784- and NOx Sensor 2 Control Module -J881-

Courtesy of AUDI OF AMERICA, LLC

-- Remove nut -A- and remove the Particulate Sensor -G784- -2-.

-- Remove the Particulate Sensor -G784- -1-.

Fig 2: Particulate Sensor -G784- and NOx Sensor 2 -G687-

Courtesy of AUDI OF AMERICA, LLC