Particulate Sensor -G784-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the Particulate Sensor -G784- into the bracket and secure it with nut -A-.
-- Tighten Particulate Sensor -G784-.
-- Connect the cable tie.
-- Connect the connector -1-.
Fig 1: Particulate Sensor -G784- and NOx Sensor 2 Control Module -J881-