LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 643 (3.0L - Diesel Fuel Injection - Engine Code(S): CPNB (As Of 05.2013)) >> 23 Diesel Fuel Injection >> Removal And Installation >> Mass Air Flow Sensor -G70-, REMOVING AND INSTALLING >> Removing

Mass Air Flow Sensor -G70-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -2-.

Fig 1: Identifying Fastening Bolts -Arrows- And Air Filter Housing Upper Section
GWWA24-10502Courtesy of AUDI OF AMERICA, LLC

-- Open the air guide hose clamp -3- and remove the hose from the Mass Airflow Sensor -G70-.

-- Open both clips on the Mass Airflow Sensor -G70-.

-- Carefully remove the Mass Air Flow Sensor -G70- out of guide at air filter housing.