LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 643 (3.0L - Diesel Fuel Injection - Engine Code(S): CPNB (As Of 05.2013)) >> 23 Diesel Fuel Injection >> Removal And Installation >> Intake Flap Motor -V157-, REMOVING AND INSTALLING >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Replace the seals

The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.

-- Install oil dipstick guide tube. Tightening Specifications: 9 Nm (Bolts) .

-- Install the EGR pipe. Refer to OVERVIEW - EXHAUST GAS RECIRCULATION -item 19-. .

scientia non olet · About LEMON Manuals