Fuel Pressure Sensor -G247-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Socket 27 mm T40218
- Torque wrench
NOTE:
The Fuel Pressure Sensor -G247- measures the actual fuel pressure in the high pressure system and delivers a voltage signal to the Engine Control Module -J623-.
If the malfunctions, the pressure is controlled via an Engine Control Module (ECM) characteristic map (maximum engine speed is limited to emergency operation mode).
The Fuel Pressure Sensor -G247- has a biting edge as a seal.