Engine Temperature Control Sensor -G694-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specification, refer to OVERVIEW - ENGINE COOLANT TEMPERATURE SENSOR .

NOTE:

Replace the O-rings.

Insert the Engine Temperature Control Sensor -G694- immediately to prevent coolant loss.

-- Check the coolant level, refer to Check the coolant level .