Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Coolant Reservoir Marking

Courtesy of AUDI OF AMERICA, LLC

Engine is cold.

-- Briefly open the coolant reservoir cap to reduce the residual pressure in the coolant system.

-- Remove the front noise insulation -1-, refer to OVERVIEW - NOISE INSULATION .

Fig 2: Identifying Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

Engine Coolant Temperature Sensor On Radiator Outlet -G83- Version 1:

Fig 3: Engine Coolant Temperature Sensor on Radiator Outlet

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

NOTE:

Use a cloth to catch any leaking coolant.

-- Remove the clamp -2- and the Engine Coolant Temperature Sensor on Radiator Outlet -G83-.

Engine Coolant Temperature Sensor On Radiator Outlet -G83- Version 2:

Fig 4: Engine Coolant Temperature Sensor on Radiator Outlet -G83- component location

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

NOTE:

Use a cloth to catch any leaking coolant.

-- Remove the clamp -1- and the Engine Coolant Temperature Sensor on Radiator Outlet -G83-.