Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-rings.

Insert the new Engine Coolant Temperature Sensor on Radiator Outlet -G83- immediately to prevent coolant loss.

-- Install the front noise insulation, refer to OVERVIEW - NOISE INSULATION .

-- Check the coolant level, refer to Check the coolant level .