Coolant Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Clamp

Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant, refer to COOLANT, DRAINING AND FILLING .

-- Remove the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Loosen the clamp -2- and remove the connection from the radiator.

NOTE:

Ignore item -1-.

-- Remove the bolts -arrows- for the coolant pump ribbed belt pulley using a Wrench - Pin Type 3212 to counterhold.

Fig 2: Bolts And Wrench - Pin Type 3212

Courtesy of AUDI OF AMERICA, LLC

-- Place the Shop Crane - Drip Tray VAS6208 under engine.

-- Remove the bolts -arrows- and remove the coolant pump.

Fig 3: Remove The Bolts

Courtesy of AUDI OF AMERICA, LLC