Upper Coolant Pipes, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant, refer to COOLANT, DRAINING AND FILLING .

-- Remove the intake manifold, refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .

-- Remove the turbocharger, refer to TURBOCHARGER, REMOVING AND INSTALLING .

-- Loosen hose clamp -1- and lift the clamp -2- to remove the coolant hoses.

Fig 1: Hose Clamp, Coolant Hoses & Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and then remove the upper coolant pipe from the cylinder head.