Upper Coolant Pipes, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications, refer to OVERVIEW - COOLANT PIPES .

NOTE:

Replace the O-ring.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Clean and/or smooth the sealing surfaces of the O-rings.

-- Coat the O-ring with coolant and slide it onto the coolant pipe.

-- Install the intake manifold, refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .

-- Install the turbocharger, refer to TURBOCHARGER, REMOVING AND INSTALLING .

-- Connect the coolant hose to the coupling, refer to Figure.

-- Fill with coolant, refer to Filling .