LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 642 (3.0L - Engine Cooling System - Engine Code(S): CPNB) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Rear Coolant Pipe, Removing And Installing >> Removing

Left Rear Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bolts
GWWA10-10883Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant, refer to COOLANT, DRAINING AND FILLING .

-- Remove the left engine mount, refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the left engine support.

-- Remove the bolts -1-.

Fig 2: Removing/Installing Left Rear Coolant Pipe
GWWA19-11390Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -arrows- to remove the coolant hoses from the coolant pipe.

-- Remove left rear coolant line.