Front Left Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to OVERVIEW - COOLANT PIPES .

NOTE:

Replace the O-ring.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Clean and/or smooth the sealing surfaces of the O-rings.

-- Coat the O-ring with coolant and slide it onto the coolant pipe.

The rest of the installation is performed in reverse order of removal, noting the following:

-- Install the Air Conditioning (A/C) compressor bracket, refer to AUXILIARY COMPONENTS BRACKET, REMOVING AND INSTALLING .