Front Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications, refer to OVERVIEW - COOLANT PIPES .

NOTE:

Replace the O-ring.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Clean and/or smooth the sealing surfaces of the O-rings.

-- Coat the O-ring with coolant and slide it onto the coolant pipe.

-- Install the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Install the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Fill with coolant, refer to Filling .