LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 641 (3.0L - Crankshaft & Cylinder Block - Engine Code(S): CPNB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Vibration Damper, Removing And Installing >> Installing

Vibration Damper, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace any bolts that were tightened with an additional turn.

Replace the shim.

-- Install the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Install the crossmember, refer to TORQUE SUPPORT AND CROSSMEMBER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals