Ribbed Belt, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front noise insulation -1-, refer to FRONT NOISE INSULATION .

-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .

CAUTION:

Risk of damage due to reversed running direction on a used ribbed belt.

Before removing ribbed belt, marking running direction with chalk or felt-tip pen for reinstallation later.

-- Turn the tensioning element clockwise using the Torx Socket - T60 T40087 -arrow- to release the tension on the ribbed belt.

Fig 2: Releasing Tension On Ribbed Belt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ribbed belt and secure the tensioning element with Locking Pin T10060A.